Saturday, May 10, 2008

Shaping the Legs

To shape the legs for the sawbuck table, I first traced the profile onto the leg blanks using the cardboard template. Then I transferred the profile to the other side of the leg. With the profile marked on both sides, you can check back and forth as you're shaping to ensure that the profile is square.









I roughed out the shape on the band saw and then cleaned up the cuts with round files, triangular files, smooth files, a Nicholson #50 rasp, a Lee Valley rounded spokeshave, and sandpaper.

The shaped leg in the last photo is sitting on top of what's left of the cherry that is being used to make this project.